Beruflich Dokumente
Kultur Dokumente
655
Issue: 08/06
1. General Properties
The STEULER Adhesive System 5 consists of the components Steuler Primer P 2A,
Steuler Primer P 2B, Steuler Adhesive K 4, Steuler Hardener H 3 and is used for bonding of
non-vulcanised Steuler soft rubber sheets on base of chloroprene for vulcanisation in
autoclave. The Steuler Adhesive System 5 has a long application window, as well as a high
tack. After vulcanisation in autoclave with hot air or steam vapour, a very good adhesion is
achieved.
2. Product Description
3. Application Conditions:
3.1 Primer
After the substrate preparation as described in the pertinent Technical Information Sheet of
the rubber sheets, first the one-component primer Steuler Primer P 2A and after the drying
time, the one-component primer Primer P 2B is applied.
Primer 1 2
Type: Primer P 2A Primer P 2B
Colour: Grey Black
Application method : Painting /rolling Painting/rolling
Number of coats: 1 1
Drying time: Min. 2 hours Min. 2 hours
Drying time: Min. 2 hours, max. 14 days Min. 2 hours, max. 5 days
Consumption Approx. 0,2 kg/m² Approx. 0,2 kg/m²
3.2 Adhesive
Colour: Blue
Number of coats: 2
Colour: Blue
Number of coats: 1
The drying times given above refer to an ambient temperature of +20° C and 65% relative
humidity. After the minimum drying times, the rubber sheet is covered with a linen or PE-
sheet and rolled. The real necessary drying times depend on the site conditions.
The linen has to be washed, ironed (free from pleats) and free from threads and fluff.
4. Cleaning
5. Shelf Life
Shelf Life at a storage temperature of +20° C in closed original containers under observance
of the storage conditions acc. to DIN 7716.
Prior to using our material, please make sure that you have the latest issue of the Technical Information and/or Data Sheets. All
details in this Technical Information Sheet are accurate to the best of our knowledge at time of printing.
No liability on our part can be inferred nor can such be accepted on the basis of the information given here. This Technical
Information Sheet must not be construed as implying that it might replace the know-how offered by a specialist applicator. Product
changes reserved.