Beruflich Dokumente
Kultur Dokumente
Bohrwerkzeuge und
Bohrrohre
Drilling Tools and Casings
BG Accessory
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:53 Uhr Seite 2
2
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 3
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 4
Allgemeine Informationen
General information
SB Schneckenbohrer KR Kernrohr
Auger Core barrel
KB Kastenbohrer KS Kernschneider
Bucket Cross cutter
Einsatzbereiche
Range of applications
SB SB
Schneckenbohrer
SB-K SB-K
Augers
SBF-K
SBF-P
SBF-Z2
KB KB
Kastenbohrer
Buckets
KB-K
KBF-K
KB-P KB-P KBF-P
auch Findlinge
Core barrels
KR-WS
Kernrohre
also boulders
klüftig
KR-R fractured
kompakt
KR-RM-HF compact
Das Diagramm dient zur unverbindlichen Abschätzung von The chart is a non-binding assessment of ranges of applications
Einsatzbereichen verschiedener Bohrwerkzeuge. Es stellt kein of various drilling tools. It does not constitute a legally binding
verbindliches Auswahldiagramm dar. selection chart.
4
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 5
Schneckenbohrer
■ Für alle Drehmomente der BG-Serie geeignet
■ Leisungsoptimierte Schneidengeometrien
■ Höchste Fertigungsqualität
■ Optimaler Verschleißschutz
Auger
■ Suitable for all torques of the BG series
■ Performance-optimized cutting geometries
■ Highest manufacturing quality
■ Optimal wear protection
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 6
Schneckenbohrer
SB Auger
SB
einschneidig
single cut
GL
NL
D
SB-2
zweischneidig
double cut
OD
Anwendungsbereich SB SB-2
weiche bis steife bindige Böden, locker
NL (mm) 1.700 2.250 1.700 2.250
bis mitteldicht gelagerte nichtbindige
GL (mm) 2.315 2.865 2.315 2.865
Böden
SB-2 bevorzugt für unverrohrte
Bohrungen oder für große Durchmesser D (mm) OD (mm) Gewicht (kg) Gewicht (kg) Gewicht (kg) Gewicht (kg)
Weight Weight Weight Weight
Ausstattung 520 620 600 750
Kellybox 200 mm 600 630 770
Wendelpilot und Flachzähne FZ 650 750 645 815
Verschleißschutz: Auftragsschweißung 700 680 860
oder Verschleißwinkel 780 880 750 955 770 960
800 700 880 750 915
900 1.000 765 970 785 990
Main application 1.000 880 1.100 860 1.095
soft to stiff silt and clay, loose to medium 1.060 1.180 895 1.145 910 1.160
dense sand, gravel 1.180 1.300 965 1.215 980 1.235
SB-2 is recommended for uncased bores 1.200 980 1.240 1.000 1.255
or for bigger diameters 1.350 1.500 1.070 1.370 1.085 1.390
1.500 1.650 1.210 1.570 1.225 1.590
Features 1.650 1.800 1.320 1.685
Kellybox 200 mm
1.800 1.350 1.780
fishtail pilot and teeth FZ
1.830 2.000 1.395 1.825
wear protection: hard facing or wear
2.000 1.570 2.070
strips
2.320 2.580
2.500 2.900
Andere Längen und Durchmesser auf Other lengths and diameters on request.
Anfrage. Angegebene Gewichte sind All weigths are approximate values.
Cirka-Werte.
6
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 7
SB-K
einschneidig
single cut
GL
NL
SB-K2
zweischneidig D
double cut
OD
7
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 8
SBF-K
einschneidig
single cut
GL
NL
D
SBF-K2
zweischneidig
double cut
OD
8
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 9
Progressivschneckenbohrer
Progressive auger SBF-P
SBF-P
einschneidig
single cut
GL
NL
SBF-P2
zweischneidig D
double cut
OD
Ausstattung D (mm) OD (mm) Gewicht (kg) Gewicht (kg) Gewicht (kg) Gewicht (kg)
Kellybox 200 mm Weight Weight Weight Weight
Rundschaftmeißelpilot RP4 520 620 600 750
progressive Schneidleiste mit 600 625 770
Rundschaftmeißeln 650 750 660 830
Verschleißschutz: Auftragsschweißung 700 695 870
oder Verschleißwinkel 780 880 755 950 768 968
800 715 910 745 935
900 1.000 790 980 813 1.013
Main application 1.000 890 1.070 866 1.082
moderately strong to strong rock 1.060 1.180 940 1.185 930 1.175
(50 – 100 MPa) 1.180 1.300 995 1.252 985 1.242
SBF-P2 is recommended in uncased 1.200 1.010 1.280 1.000 1.263
bores or for bigger diameters 1.350 1.500 1.090 1.400 1.118 1.409
1.500 1.650 1.215 1.620 1.276 1.630
Features 1.650 1.800 1.570 1.572
Kellybox 200 mm
1.800 1.860 1.650
pilot bit RP4 with round shank chisels
1.830 2.000 1.900 1.700
progressive cutting edge with round
2.000 2.050 1.950
shank chisels
wear protection: hard facing or wear 2.320 2.356
strips 2.500 2.570
Andere Längen und Durchmesser auf Other lengths and diameters on request.
Anfrage. Angegebene Gewichte sind All weigths are approximate values.
Cirka-Werte.
9
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 10
SBF-Z2
zweischneidig GL
double cut NL
OD
Anwendungsbereich SBF-Z2
leichter bis mittelharter Fels (5 – 50 MPa)
NL (mm) 1.700 2.250
gut geeignet für klüftigen Fels
GL (mm) 2.240 2.790
Ausstattung
Kellybox 200 mm D (mm) OD (mm) Gewicht (kg) Gewicht (kg)
ohne Zentrumspilot Weight Weight
Schneidleiste mit Rundschaftmeißeln 520 620 670 815
Verschleißschutz: Auftragsschweißung 600 695 845
oder Verschleißwinkel 650 750 740 905
700 780 950
780 880 850 1.045
800 820 1.005
Main application
900 1.000 980 1.065
moderately weak to moderately strong
rock (5 – 50 MPa) 1.000 970 1.185
very suitable in fractured rock 1.060 1.180 1.025 1.245
1.180 1.300 1.070 1.320
Features 1.200 1.085 1.345
Kellybox 200 mm 1.350 1.500 1.185 1.490
without pilot bit 1.500 1.650 1.335 1.695
cutting edge with round shank chisels 1.650 1.800 1.465 1.840
wear protection: hard facing or wear
1.800 1.550 1.850
strips
1.830 2.000 1.600 1.900
2.000 1.800 2.160
Andere Längen und Durchmesser auf Other lengths and diameters on request.
Anfrage. Angegebene Gewichte sind All weigths are approximate values.
Cirka-Werte.
10
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 11
Kastenbohrer
■ Bauer Kastenbohrer – Das Original
■ Konzipiert für höchste Bohrleistungen
■ Langlebig und standfest
Drilling bucket
■ Bauer drilling bucket – The original
■ Designed for maximum drilling performance
■ Durable and stable
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 12
Kastenbohrer
KB Drilling bucket
KB
einschneidig
single cut
GL
NL
D
KB-2
zweischneidig
double cut
OD
Anwendungsbereich KB KB-2
weiche bis steife bindige Böden, locker
NL (mm) 1.550 1.850 1.600 1.900
bis mitteldicht gelagerte nichtbindige
GL (mm) 2.150 2.450 2.200 2.500
Böden
KB bis Grobkies
KB-2 bevorzugt für unverrohrte D (mm) OD (mm) Gewicht (kg) Gewicht (kg) Gewicht (kg) Gewicht (kg)
Bohrungen und für große Durchmesser. Weight Weight Weight Weight
520 620 660 727
Ausstattung 600 750 825
Kellybox 200 mm 650 750 820 902
Wendelpilot und Flachzähne FZ 700 890 980
Saugkanal 780 880 992 1.095
Verschleißschutz: Auftragsschweißung
800 1.020 1.125
oder Verschleißstreifen
900 1.000 1.192 1.307
1.000 1.360 1.490
1.060 1.180 1.445 1.593 1.600 1.750
Main application 1.180 1.300 1.650 1.807 1.840 2.005
soft to stiff silt and clay, loose to medium 1.200 1.685 1.840 1.875 2.045
dense sand and gravel 1.350 1.500 1.956 2.134 2.115 2.380
KB up to coarse gravel 1.500 1.650 2.265 2.463 2.542 2.750
KB-2 is recommended in uncased bores 1.650 1.800 2.995 3.225
and for bigger diameters.
1.800 3.375 3.625
1.830 2.000 3.445 3.750
Features
2.000 3.950 4.265
Kellybox 200 mm
fishtail pilot and flat teeth FZ 2.320 4.720 5.090
ventilation pipe 2.500 5.330 5.730
wear protection: hard facing or wear Andere Längen und Durchmesser auf Other lengths and diameters on request.
strips Anfrage. Angegebene Gewichte sind All weigths are approximate values.
Cirka-Werte.
12
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 13
KB-K
einschneidig
single cut
GL
NL
KB-K2 D
zweischneidig
double cut
OD
13
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 14
KBF-K
einschneidig
single cut
GL
NL
KBF-K2 D
zweischneidig
double cut
OD
14
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 15
KB-P
einschneidig
single cut GL
NL
OD
Ausstattung Features
Kellybox 200 mm Kellybox 200 mm
Wendelpilot fishtail pilot
Progressive Schneidleiste mit progressive cutting edge with teeth FZ
Flachzähnen FZ ventilation pipe
Saugkanal wear protection: hard facing
Verschleißschutz: Auftragsschweißung or wear strips
oder Verschleißstreifen
KB-P
Rohrlänge / Tube length 1.200 mm Rohrlänge / Tube length 1.500 mm
D (mm) OD (mm) Gewicht (kg) NL (mm) GL (mm) Gewicht (kg) NL (mm) GL (mm)
Weight Weight
780 880 1.047 1.725 2.315 1.150 2.025 2.615
900 1.000 1.258 1.770 2.360 1.375 2.070 2.660
1.000 1.457 1.850 2.440 1.590 2.150 2.740
1.060 1.180 1.550 1.850 2.440 1.700 2.150 2.740
1.180 1.300 1.783 1.965 2.555 1.940 2.265 2.855
1.200 1.820 1.965 2.555 1.975 2.265 2.855
1.350 1.500 2.120 2.035 2.625 2.230 2.335 2.925
1.500 1.650 2.450 2.060 2.650 2.650 2.360 2.950
1.650 1.800 2.830 2.105 2.695 3.030 2.405 2.995
Andere Längen und Durchmesser auf Anfrage. Angegebene Gewichte sind Cirka-Werte.
Other lengths and diameters on request. All weigths are approximate values.
15
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 16
KBF-P
GL
NL
OD
Anwendungsbereich Main application
mittelharter bis harter Fels (10 – 100 MPa) moderately strong to strong rock
(10 – 100 MPa)
Ausstattung
Kellybox 200 mm Features
Rundschaftmeißelpilot RP 4 Kellybox 200 mm
progressive Schneidleiste mit round shank chisel pilot RP4
Rundschaftmeißeln progressive cutting edge with round
Saugkanal shank chisels
Verschleißschutz: Auftragsschweißung ventilation pipe
oder Verschleißwinkel wear protection: hard facing or wear
strips
KBF-P
Rohrlänge / Tube length 1.200 mm Rohrlänge / Tube length 1.500 mm
D (mm) OD (mm) Gewicht (kg) NL (mm) GL (mm) Gewicht (kg) NL (mm) GL (mm)
Weight Weight
520 620 733 1.860 2.375 800 2.160 2.675
600 850 1.890 2.405 925 2.190 2.705
650 750 913 1.790 2.305 995 2.090 2.605
700 1.000 1.800 2.315 1.090 2.100 2.615
780 880 1.108 1.830 2.345 1.211 2.130 2.645
900 1.000 1.335 1.850 2.365 1.450 2.150 2.665
1.000 1.547 1.940 2.455 1.677 2.240 2.755
1.060 1.180 1.650 1.940 2.455 1.798 2.240 2.755
1.180 1.300 1.893 2.020 2.535 2.050 2.320 2.835
1.200 1.935 2.020 2.535 2.090 2.320 2.835
1.350 1.500 2.305 2.130 2.645 2.483 2.430 2.945
1.500 1.650 2.675 2.195 2.710 2.873 2.495 3.010
1.650 1.800 3.045 2.260 2.775 3.265 2.560 3.075
Andere Längen und Durchmesser auf Anfrage. Angegebene Gewichte sind Cirka-Werte.
Other lengths and diameters on request. All weigths are approximate values.
16
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:54 Uhr Seite 17
KB-L
GL
NL
KB-WL
D
OD
Ausstattung Features
Kellybox 200 mm Kellybox 200 mm
KB-WL mit wechselbarer Räumerleiste KB-WL with changeable cleaning edge
(optional) (optional)
Saugkanal ventilation pipe
Verschleißschutz: Auftragsschweißung wear protection: hard facing or wear
oder Verschleißwinkel strips
D (mm) OD (mm) Gewicht (kg) Gewicht (kg) Gewicht (kg) Gewicht (kg) Gewicht (kg) Gewicht (kg)
Weight Weight Weight Weight Weight Weight
520 620 618 685 635 700
600 709 784 725 800
650 750 773 855 790 875
700 845 935 860 950
780 880 947 1.050 965 1.065
800 970 1.175 990 1.095
900 1.000 1.148 1.263 1.165 1.280
1.000 1.320 1.450 1.345 1.475
1.060 1.180 1.410 1.558 1.435 1.580 1.620 1.770
1.180 1.300 1.618 1.775 1.660 1.815 1.845 2.010
1.200 1.655 1.810 1.695 1.850 1.880 2.050
1.350 1.500 1.930 2.108 2.015 2.195 2.140 2.405
1.500 1.650 2.240 2.438 2.335 2.535 2.565 2.775
1.650 1.800 2.660 2.880 3.030 3.260
1.800 3.420 3.670
1.830 2.000 3.485 3.790
Andere Längen und Durchmesser auf Anfrage. Angegebene Gewichte sind Cirka-Werte.
Other lengths and diameters on request. All weigths are approximate values.
17
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:55 Uhr Seite 18
Kernrohr
■ Maximale Schneidleistung
■ Schneidengeometrie gewährleistet minimalen Verschleiß
■ Für anspruchsvolle Bohraufgaben
Core barrel
■ Maximum cutting performance
■ Cutting geometry ensures minimal wear
■ For challenging drilling applications
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:55 Uhr Seite 19
KR-S GL
NL
OD
Anwendungsbereich KR-S
bevorzugt zum Durchkernen von
NL (mm) 1.320 1.520
bewehrtem Beton
GL (mm) 1.610 1.910
Ausstattung Rohrlänge (mm) 1.040 1.340
Kellybox 200 mm Tube length (mm)
Schneidring mit Hartmetallstiften
Verschleißschutz: Auftragsschweißung D (mm) OD (mm) Gewicht (kg) Gewicht (kg)
oder Verschleißwinkel Weight Weight
520 620 435
600 465
650 750 500
Main application
700 530
mainly recommended for cutting through
780 880 675
reinforced concrete
800 695
Features 900 1.000 780
Kellybox 200 mm 1.000 870
cutting ring with pin teeth 1.060 1.180 920
wear protection: hard facing or wear 1.180 1.300 1.045
strips 1.200 1.060
1.350 1.500 1.220
1.500 1.650 1.370
1.650 1.800 1.530
1.800 1.690
1.830 2.000 1.715
2.000 1.920
Andere Längen und Durchmesser auf Other lengths and diameters on request.
Anfrage. Angegebene Gewichte sind All weigths are approximate values.
Cirka-Werte.
19
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:55 Uhr Seite 20
KR-WS GL
NL
OD
Anwendungsbereich KR-WS
harter Fels (bis 100 MPa), leicht
NL (mm) 1.300 1.600
bewehrter Beton
GL (mm) 1.700 2.000
Auch für Findlinge geeignet
Rohrlänge (mm) 1.200 1.500
Ausstattung Tube length (mm)
Kellybox 200 mm
Schneidring mit hartmetallbesetzten D (mm) OD (mm) Gewicht (kg) Gewicht (kg)
Stollen. Die Stollenhalter sind im Kernrohr Weight Weight
versenkt angeschweißt. 520 620 450
Die Stollen sind mit Stiften gesichert und 600 555
können leicht gewechselt werden. 650 750 560
700 605
780 880 760
Main application 800 775
strong rock (up to 100 MPa), lightly 900 1.000 875
reinforced concrete 1.000 965
Also suitable for boulders 1.060 1.180 1.030
1.180 1.300 1.170
Features 1.200 1.190
Kellybox 200 mm 1.350 1.500 1.375
Cutting ring with tungsten carbide
1.500 1.650 1.485
armoured blocks. The block holders are
1.650 1.800 1.655
welded into the base ring of the core
1.800 1.835
barrel.
The blocks are secured with pins and can 1.830 2.000 1.870
be easily replaced. 2.000 2.080
2.320 2.500
2.500 2.720
Andere Längen und Durchmesser auf Other lengths and diameters on request.
Anfrage. Angegebene Gewichte sind All weigths are approximate values.
Cirka-Werte.
20
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:55 Uhr Seite 21
KR-R
GL
NL
OD
Anwendungsbereich KR-R
harter Fels (bis 100 MPa)
NL (mm) 1.320 1.620
gut geeignet in klüftigem Fels
GL (mm) 1.795 2.095
Ausstattung Rohrlänge (mm) 1.200 1.500
Kellybox 200 mm Tube length (mm)
Schneidring mit versetzt angeordneten
Rundschaftmeißeln D (mm) OD (mm) Gewicht (kg) Gewicht (kg)
Angeschweißte Meißelhalter Weight Weight
520 620 500
600 575
650 750 635
Main application
700 685
strong rock (up to 100 MPa)
780 880 860
suitable for cutting through fissured rock
800 885
Features 900 1.000 1.005
Kellybox 200 mm 1.000 1.105
Cutting ring with staggered arrangement 1.060 1.180 1.190
of round shank chisels 1.180 1.300 1.370
Chisel holders are welded to the base 1.200 1.390
body 1.350 1.500 1.580
1.500 1.650 1.680
1.650 1.800 1.885
1.800 2.090
1.830 2.000 2.135
2.000 2.370
2.320 2.850
2.500 3.095
Andere Längen und Durchmesser auf Other lengths and diameters on request.
Anfrage. Angegebene Gewichte sind All weigths are approximate values.
Cirka-Werte.
21
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:55 Uhr Seite 22
KR-RM-HF
GL
NL
OD
Anwendungsbereich KR-RM-HF
harter Fels (größer 100 MPa)
NL (mm) 2.100
gut geeignet in kompaktem Fels
GL (mm) 2.515
Ausstattung Rohrlänge (mm) 1.500
Kellybox 200 mm Tube length (mm)
Schneidring mit versetzt angeordneten
Rollenmeißeln D (mm) OD (mm) Gewicht (kg)
Anschraubbares Rollenmeißel-System. Weight
Die Rollenmeißel können mit geeignetem 780 880 1.010
Werkzeug leicht ausgewechselt werden. 800 1.040
Außenwendel und Flachzähne zur 900 1.000 1.140
Optimierung der Bohrleistung
1.000 1.290
1.060 1.180 1.400
Main application 1.180 1.300 1.550
strong rock (more than 100 MPa) 1.200 1.580
suitable in compact rock 1.350 1.500 1.750
1.500 1.650 2.000
Features 1.650 1.800 2.190
Kellybox 200 mm 1.800 2.410
Cutting ring with staggered arrangement 1.830 2.000 2.470
of roller bits
Screw-on type roller bit system Andere Längen und Durchmesser auf Anfrage.
Easy replacement of rollers with suitable Angegebene Gewichte sind Cirka-Werte.
tools. Other lengths and diameters on request. All weigths are
Outside helix and flat teeth to optimize approximate values.
drilling performance
22
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:55 Uhr Seite 23
Kernschneider
Cross cutter KS-R
KS-R
GL
NL
Anwendungsbereich
harter Fels (bis 100 Mpa) KS-R
gut geeignet in klüftigem Fels
NL (mm) 1.660
GL (mm) 2.200
Ausstattung
Kellybox 200 mm Rohrlänge (mm) 1.500
Schneidring mit versetzt angeordneten Rundschaftmeißeln und Tube length (mm)
zusätzlichem Schneidenzentrum
Angeschweißte Meißelhalter. D (mm) OD (mm) Gewicht (kg)
Weight
700 1.060
780 880 1.150
A Cross-Cutter (KS-R) is mainly used to break rock cores 800 1.180
which remain in the borehole after using a core barrel.
900 1.000 1.305
The core is broken with round shank chisels. The cuttings are
1.000 1.410
then removed with buckets.
It is also suitable for drilling hard, jointed rock (< 100 MPa) and 1.060 1.180 1.485
for penetrating through layers containing boulders. 1.180 1.300 1.650
1.200 1.680
Main application 1.350 1.500 1.900
Main application 1.500 1.650 2.040
Hard rock formations (up to 100 MPa) 1.650 1.800 2.270
1.800 2.520
Features
1.830 2.000 2.585
Kellybox 200 mm
2.000 2.820
Cutting ring with staggered round shank chisels and additional
2.320 3.350
central 3-bladed cutter head fitted with round shank chisels.
Welded round shank chisel holders 2.500 3.590
Andere Längen und Durchmesser auf Anfrage.
Angegebene Gewichte sind Cirka-Werte.
Other lengths and diameters on request. All weigths are
approximate values.
23
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:55 Uhr Seite 24
Sonderbohrwerkzeuge
Special drilling tools
Bauer bietet für besondere Anwendungen Bauer provides special drilling tools for
im Kellybohrverfahren eine breite Palette special Kelly drilling applications.
an Sonderbohrwerkzeugen an. Apart from these typical examples of
Neben den auf diesen Seiten special drilling tools it is also our target to
aufgelisteten typischen develop with you individual solutions for
Sonderbohrwerkzeugen, entwickeln wir challenging projects.
mit Ihnen auch individuelle Lösungen für
besonders anspruchsvolle Projekte.
Vollschnittbohrkopf Rollenmeißel-Vollschnittbohrköpfe Full face roller bit drill heads are used
Full face drill head werden bei sehr hartem Fels mit einer in very hard rock formations with
Festigkeit > 100 MPa verwendet. strengths > 100 MPa.
Sie ermöglichen das Abteufen des They make drilling through rock in a
Gesteins in einem Bohrzyklus ohne den single drilling cycle possible without time-
aufwendigen Vorgang eines consuming and costly tool changes. The
Werkzeugwechsels. rock cuttings are usually conveyed by the
Das Bohrklein wird normalerweise mittels air-lift technique into a collector box
des Lufthebeverfahrens in einen über der mounted on top of the drill head. After
Schneide befindlichen Auffangbehälter having drilled to a certain depth, the full
gefördert. face drill head is retracted and the
Nach dem Abbohren einer collector box is emptied.
entsprechenden Tiefe wird der
Vollschnittbohrkopf gehoben und der
Auffangbehälter entleert.
Rohrunterschneider Der Schneckenbohrer mit The auger equipped with a reamer arm is
Casing underreamer Erweiterungsschneide ist mit einer fitted with an additional folding reamer
zusätzlichen, klappbaren Schneide arm which, when extended, enlarges the
ausgestattet, welche im ausgeklappten pile bore below the casing shoe to the
Zustand die Bohrung unterhalb des outer diameter of the casing tube.
Bohrrohres auf den Außendurchmesser As a result, the force to be applied during
des Rohres aufweitet. the installation of the casing string is
Die für den Verrohrungsvorgang considerably reduced and enables
aufzubringende Kraft wird dadurch casings also to be drilled into rock
erheblich reduziert und deshalb können formations.
Bohrrohre auch in Felsschichten
eingedreht werden.
24
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:55 Uhr Seite 25
Sonderbohrwerkzeuge
Special drilling tools
Belling buckets are used for enlarging the base area of a pile in
stable (mainly cohesive) soil formations. The cutting arms are
gradually extended by applying vertical crowd force with the
Kelly bar on a push rod and a leverage system. The spoil
loosened by the rotating belling bucket and cutting arms falls
into the open shell section at the bottom of the bucket. When
extracting the tool from the borehole, the upward movement of
the Kelly bar causes the cutting arms to be retracted. The
maximum opening angle of the bell is about 60° and the
standard increase in diameter is about 2 to 3 times the shaft
diameter.
25
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:56 Uhr Seite 26
Verschleißschutz
Wear protection
Alle Bohrwerkzeuge von Bauer All Bauer Maschinen drilling tools are
Maschinen werden zur Verlängerung der provided with appropriate wear
Lebensdauer mit einem Verschleißschutz protection to increase their service life.
versehen. Depending on the type, application and
Die Werkzeuge werden je nach critical areas of wear, the tools are
Werkzeugtyp, Anforderung und protected by way of hard facing or by
Verschleißschutzstelle durch eine wear elements.
Auftragsschweißung oder durch
Verschleißelemente geschützt.
Auftragsschweißung Bei dieser Variante wird auf kritische Critical areas are protected with
Hard facing Bereiche eine Auftragsschweißung hard facing.
aufgebracht.
Verschleißwinkel Verschleißstreifen
Angular wear strips Wear strips
26
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:56 Uhr Seite 27
Bohrrohre
■ Auf alle gängigen Durchmesser abgestimmte Bohrrohrsysteme
■ Höchste Materialgüte bei höchster Fertigungsqualität
■ Auf die jeweiligen Bodenverhältnisse einstellbares Rohrschuhsystem
Casings
■ Casing systems matched to all standard diameters
■ Maximum material quality – highest manufacturing quality
■ Casing shoe system adjustable to prevailing ground conditions
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:56 Uhr Seite 28
Bohrrohre
Casings
Bauer Bohrrohre werden zur Stützung von Bauer casings are used for stabilising
Bohrlöchern in nicht standfesten Böden boreholes in unstable soil formations.
eingesetzt. Sie sind speziell zur They are designed specifically for the
Übertragung der hohen Drehmomente transmission of high torques and crowd
und Vorschubkräfte von BG Bohrgeräten forces generated by BG rotary drilling rigs
und Bauer BV Verrohrungsanlagen and Bauer BV casing oscillators.
ausgelegt. Casings are produced in double-walled
Die Bohrrohre werden standardmäßig in construction as standard. This gives
doppelwandiger Bauweise hergestellt. casings additional rigidity and strength
Dadurch wird das Rohr zusätzlich and provides a continuous flush drill
versteift und es entsteht ein durchgehend string (preventing jamming of drilling tools
glatter Bohrstrang (Verhinderung des during insertion and extraction).
Verhakens des Bohrwerkzeuges beim As the amount of torque to be transmitted
Ein- und Ausfahren). as well as the required casing depths
Da die zu übertragenden Drehmomente continue to increase further and further,
und auch die erforderlichen Verrohrungs- accompanied by increased wear, Bauer
tiefen immer mehr anwachsen und dies offers a reinforced version as an
mit erhöhtem Verschleiß einhergeht, alternative to standard casings. It differs
bietet Bauer als Alternative zu den by comprising a stronger inner tube with
Standardbohrrohren eine verstärkte a wall thickness of 12 mm (OD 620 – 1300
Ausführung an. Sie unterscheiden sich mm) and 16 mm (OD 1500 – 1800 mm).
durch ein stärkeres Innenrohr mit Wand-
stärken von 12 mm (OD 620 – 1300 mm)
und 16 mm (OD 1500 – 1800 mm). Sie
sind voll kompatibel zu den
Standardrohren.
a1
a2
L
t2
D2
D1
Technische Daten – doppelwandige Rohre
Technical Data – double-walled casings
D1/D2 Nutzlänge L / effective length L a1 a2 t2 Schrauben / bolts
(mm) 1m 2m 3m 4m 5m 6m (mm) (mm) (mm) (Anz. / No.)
Gewicht / weight (kg)
620/540 403 739 1.074 1.411 1.747 2.081 12 8 40 8
750/670 492 902 1.311 1.722 2.131 2.540 12 8 40 10
880/800 585 1.069 1.552 2.036 2.520 3.005 12 8 40 10
1.000/920 669 1.221 1.773 2.326 2.877 3.429 12 8 40 10
1.180/1.100 844 1.580 2.316 3.052 3.787 4.522 16 8 40 12
1.200/1.120 872 1.620 2.370 3.120 3.870 4.620 16 8 40 12
1.300/1.220 933 1.746 2.558 3.372 4.184 4.995 16 8 40 12
1.500/1.400 1.433 2.625 3.817 5.009 6.201 7.393 20 10 50 12
1.800/1.700 1.730 3.166 4.602 6.038 7.474 8.910 20 10 50 16
2.000/1.880 2.450 4.280 6.110 7.940 9.770 11.600 20 15 60 12
2.200/2.080 2.700 4.720 6.740 8.760 10.780 12.800 20 15 60 12
2.500/2.380 2.960 5.240 7.520 9.800 12.080 14.360 20 15 60 16
28
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:56 Uhr Seite 29
Rohrschuhe
Casing shoes
Rohrschuhe sind mit WS Haltern (WS 39) Casing shoes can be fitted with WS tooth
oder Anschweißzähnen Typ BR, BH holders (WS 39) or weld-on teeth type BR
bestückbar. (Weitere Zahntypen auf or BH (other types of teeth are available
Anfrage) on request).
Sie zeichnen sich besonders aus durch: They are particularly characterized by:
• Optimale Rundlaufeigenschaft • Optimal rotation characteristics
• Verbindungen zwischen Vaterteil und • Fully welded solid wall connection
Schneidring sind vollwandig ausgeführt between male joint section and cutting
und voll verschweißt. ring
• Erhöhter Verschleißschutz durch • Increased wear protection optionally
vertikale Verschleißplatten als Option available in the form of vertical wear
erhältlich plates
• Schneidring kann bei Bedarf abgetrennt • Cutting ring can be removed and
und ausgetauscht werden replaced when necessary.
Bei erhöhter Beanspruchung und für With increased operational demands and
lange Bohrwerkzeuge empfiehlt sich der for long drilling tools, use of the long
Einsatz der langen Variante des version of the casing shoe is
Rohrschuhes, da im Arbeitsbereich des recommended as the most intense strain
Bohrwerkzeuges die Innenwandung des occurs on the inner surface of the casing
Bohrrohres am intensivsten beansprucht shoe in the area of drilling tool action. At
wird. Die vollwandige Ausführung des this point, the solid-walled construction
Rohrschuhes gewährleistet an dieser of the casing shoe ensures a long service
Stelle eine lange Haltbarkeit des life for the entire drill string.
gesamten Rohrstranges.
D1
D2
t3
H1
H2 H3 t3
H4
29
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:56 Uhr Seite 30
Drehteller
Casing drive adapter
Automatik-Drehteller
Automatic casing drive adapter
unverriegelt / verriegelt /
unlocked locked
Verfügbarer Durchmesserbereich 1.000 bis 1.800 mm Available range of diameters 1,000 to 1,800 mm
30
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:56 Uhr Seite 31
Abfangschellen
Casing clamps
31
905-502-1_02-16_Drehbohr.qxd 29.03.2016 12:56 Uhr Seite 32
BG Accessory
Konstruktionsentwicklungen und Prozessverbesserungen können Design developments and process improvements may require the
Aktualisierungen und Änderungen von Spezifikation und Materialien specification and materials to be updated and changed without
ohne vorherige Ankündigung oder Haftung erforderlich machen. prior notice or liability. Illustrations may include optional equipment
Die Abbildungen enthalten möglicherweise optionale Ausstattung and not show all possible configurations.
und zeigen nicht alle möglichen Konfigurationen. These and the technical data are provided as indicative information
Diese Angaben und die technischen Daten haben ausschließlich only, with any errors and misprints reserved.
Informationscharakter.
Irrtum und Druckfehler vorbehalten. 905.502.1 3/2016