Beruflich Dokumente
Kultur Dokumente
Member of / Mitglied im
24705
Deutschen Kalibrierdienst
D-K-
19142-01-00
accredited to / akkredi ert nach Calibra on Mark
DIN EN ISO/IEC 17025:2018 Kalibrierzeichen 10/2023
Object Cup Anemometer This calibra on cer ficate documents the metrolo-
Gegenstand gical traceability to na onal standards, which reali-
ze the units of measurement according to the Inter-
Manufacturer Adolf Thies GmbH & Co. KG na onal System of Units (SI). The DAkkS is signatory
Hersteller D-37083 Gö ngen to the mul lateral agreements of the European co-
Germany opera on for Accredita on (EA) and of the Interna-
onal Laboratory Accredita on Coopera on (ILAC)
Type 4.3352.10.000
for the mutual recogni on of calibra on cer ficates.
Typ The user is obliged to have the object recalibrated at
Serial Number 09234648 / - appropriate intervals.
Dieser Kalibrierschein dokumen ert die metrologi-
Fabrikat/Serien-Nr.
sche Rückführung auf na onale Normale zur Darstel-
Customer 3dot lung der Einheiten in Übereins mmung mit dem In-
Au raggeber Tamil Nadu terna onalen Einheitensystem (SI). Die DAkkS ist Un-
India terzeichner der mul lateralen Übereinkommen der
European co-opera on for Accredita on (EA) und
Order No. 2304-2023 der Interna onal Laboratory Accredita on Coopera-
Au ragsnummer on (ILAC) zur gegensei gen Anerkennung der Ka-
librierscheine. Für die Einhaltung einer angemesse-
Numer of pages 6
nen Frist zur Wiederholung der Kalibrierung ist der
Anzahl der Seiten Benutzer verantwortlich.
Date of Calibra on 25.10.2023
Datum der Kalibrierung
This calibra on cer ficate may not be reproduced other than in full except with the permission of the issuing laboratory. Calibra on cer ficates
without signature are not valid.
Dieser Kalibrierschein darf nur vollständig und unverändert weiterverbreitet werden. Auszüge oder Änderungen bedürfen der Genehmigung
des ausstellenden Kalibrierlaboratoriums. Kalibrierscheine ohne Unterschri haben keine Gül gkeit.
Place of calibra on Wind Tunnel Center (MEASNET) at Carl von Ossietzky University, Oldenburg
Ort der Kalibrierung
Remarks none
Anmerkungen
Revision 0
Revision
This calibra on cer ficate has been generated electronically and signed manually.
Dieser Kalibrierschein wurde elektronisch erzeugt und manuell signiert.
1 Nozzle cross-secon area of the tested object incl. moun ng pipe / Querschni der Auslassdüse des Windkanals
2 Projected cross-secon area of the tested object incl. moun ng pipe / Querschni sfläche (Scha enwurf) des Prüflings inkl. Montagerohr
3 Diameter of moun ng pipe / Durchmesser des Montagerohrs
4 Ra o2 to1 /Verhältnis von2 zu1
Calibra on Result 5
Kalibrierergebnis
File: 24705
Remark:
Vermerk:
* The extended uncertainty assigned to the measurement results is obtained by mul plying the standard uncertainty by the
coverage factor k=2. It has been determined in accordance with EA-4/02 M: 2022. The value of the measured value lies within
the assigned range of values with a probability of 95%.
DAkkS is signatory to the mul lateral agreements of the European co-opera on for Accredita on (EA) and of the Interna onal
Laboratory Accredita on Coopera on (ILAC) for the mutual recogni on of calibra on cer ficates.
*Angegeben ist die erweiterte Messunsicherheit, die sich aus der Standardmessunsicherheit durch Mul plika on mit dem Erweiterungsfaktor k=2
ergibt. Sie wurde gemäß EA-4/02 M: 2022 ermi elt. Der Wert der Messgröße liegt mit einer Wahrscheinlichkeit von 95% im zugeordneten Wer ntervall.
Die Deutsche Akkredi erungsstelle GmbH ist Unterzeichnerin der mul lateralen Übereinkommen der European coopera on for Accredita on (EA) und
der Interna onal Laboratory Accredita on Coopera on (ILAC) zur gegensei gen Anerkennung der Kalibrierscheine.
5 Calibra on results only count for the tested circumstances, the tested sensor and environmental condi ons during which calibra on took place.
Annex
Remarks none
ProfEC Ventus GmbH is a Calibra on Laboratory accredited by the German Accredita on Body (Deutsche
Akkredi erungsstelle, DAkkS), registra on: D-K-19142-01-00
ProfEC Ventus GmbH is member of MEASNET (Measuring Network of Wind Energy Ins tutes) and par cipa ng in the
anemometer and wind vane calibra on expert working group of MEASNET.
6 Body serial number OR device serial number if only one serial number is given for the test object
Annex
Instrumenta on
Posi on Sensor Manufacturer Type Calibra on
1 Pitot sta c and dynamic tube Airflow NPL 8 mm 09.04.15
2 Pitot sta c and dynamic tube Airflow NPL 8 mm 08.04.15
3 Pitot sta c and dynamic tube Airflow NPL 8 mm 02.04.15
4 Pitot sta c and dynamic tube Airflow NPL 8 mm 10.04.15
5 Differen al Pressure Setra 239 27.07.23
6 Differen al Pressure Setra 239 27.07.23
7 Differen al Pressure Setra 239 27.07.23
8 Differen al Pressure Setra 239 27.07.23
9 Barometer Vaisala PTB110 27.07.23
10 Thermometer Galltec KRC 1/5-ME 08.08.23
11 Humidity sensor Galltec KRC 1/5-ME 08.08.23
12 Wind tunnel control ProfEC Ventus CPU 44172 30.01.23
Table1: Descrip on of the data acquisi on system
Calibra on set-up of the anemometer calibra on in the wind tunnel at Carl von Ossietzky University, Olden-
burg7 . The anemometer shown may differ from the calibrated one. Remark: The propor on of the set- up is
not true to scale due to imaging geometry.
The calibra on procedure in all aspects is in compliance with MEASNET Anemometer Calibra on Procedu-
re - Version 3: 2020
Annex
References
[1] M. Hölzer, 2023 - Working Instruc on: Measuring Velocity of Gases for Cup Anemometer Calibra on
[2] ISO / IEC 61400-50-1 Ed.1: 2022 - Wind measurement - Applica on of meteorological mast, nacelle and
spinner mounted instruments
www.profec-ventus.com
shop.profec-ventus.com
info@profec-ventus.com